Oomipood

Image is for illustrative purposes only

Raspberry Pi 3 mudel B+ moodul 1.4GHz 1GB

  • SKU: 2842228

 Püsikliendi hind

3+ 42.62€
1+ 48.45€

Tavahind

51.00€

Peterburi tee Oomipood, Peterburi tee 90F, Tallinn 2
Järve keskuse Oomipood, Pärnu mnt. 238, Tallinn 9
Lõunakeskuse Oomipood, Ringtee 75, Tartu 4
Põhjakeskuse Oomipood, Haljala tee 4, Rakvere 2
Kaubamajaka Oomipood, Papiniidu 8, Pärnu 2
Tasku keskuse Oomipood, Turu 2, Tartu 3

The new product is built around BCM2837B0, an updated version of the 64-bit Broadcom application processor used in Raspberry Pi 3B, which incorporates power  integrity optimisations, and a heat spreader (that’s the shiny metal bit you can
see in the photos). Together these allow us to reach higher clock frequencies (or to run at lower voltages to reduce power consumption), and to more accurately monitor and control the temperature of the chip.

Dual-band wireless LAN and Bluetooth are provided by the Cypress CYW43455 “combo” chip, connected to a Proant PCB antenna similar to the one used on Raspberry Pi Zero W. Compared to its predecessor, Raspberry Pi 3B+ delivers somewhat better
performance in the 2.4GHz band, and far better performance in the 5GHz band, as demonstrated by these iperf results from LibreELEC developer Milhouse.

The wireless circuitry is encapsulated under a metal shield, rather fetchingly embossed with our logo. This has allowed us to certify the entire board as a radio module under FCC rules, which in turn will significantly reduce the cost of conformance testing Raspberry Pi-based products.

The improved power integrity of the BCM2837B0 package, and the improved regulation accuracy of our new MaxLinear MxL7704 power management IC, have allowed us to tune our clocking and voltage rules for both better peak performance and longer-duration sustained performance.

Note that Raspberry Pi 3B+ does consume substantially more power than its predecessor. We strongly encourage you to use a high-quality 2.5A power supply

- 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU (BCM2837)
- 1GB RAM (LPDDR2 SDRAM)
- On-board wireless LAN - dual-band 802.11 b/g/n/ac (CYW43455)
- On-board Bluetooth 4.2 HS low-energy (BLE) (CYW43455)
- 4 x USB 2.0 ports
- 300Mbit/s ethernet
- 40 GPIO pins
- Full size HDMI 1.3a port
- Combined 3.5mm analog audio and composite video jack
- Camera interface (CSI)
- Display interface (DSI)
- microSD slot
- VideoCore IV multimedia/3D graphics core @ 400MHz/300MHz

Raspberry Pi 3 Model B+ andmeleht ENG1.71MBDownload

Dormikor OÜ, Peterburi tee 90f, 11415, Tallinn, Eesti
Oomipood © 2019