Your shopping cart is empty!
FIBARO Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
FIBARO Wall Plug may be operated using the service button located on its casing or via any Z-Wave compatible controller.
Compatible with any Z-Wave Controller.
Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher).
Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
Advanced microprocessor control.
Executive element – relay.
Active power and energy metering functionality.
Compact and stylish casing.
Easy installation – just plug in.
Power supply: 230V AC, 50/60 Hz
Rated load current: 11A
Power consumption: up to 1.6W
Power output (for resistive load): 2.5kW
In accordance with EU standards: RED 2014/53/EU
Operational temperature: 0 – 40°C
To be used with E or F type (Schuko) sockets:
CEE 7/16 – max load 2.5 A
CEE 7/17 – max load 11A
Dual type plugs E/F
Radio protocol: Z-Wave
Z-Wave+ (firmware 3.2 or higher)
Radio frequency: 868.4 or 869.8 MHz EU;
869.0 MHz RU;
Radio transmit power: up to -10 dBm (EIRP)
Range: up to 50 m outdoors
up to 30 m indoors
up to 40 m indoors (firmware 3.2 or higher)
(depending on terrain and building structure)
Dimensions: (D x H): 43 x 65mm