Oomipood

LOYAL CUSTOMER DISCOUNTS

at least -5% off

QUANTITY DISCOUNT

more is better

SHIPPING TO DPD PARCEL LOCKER

FREE IN ESTONIA (FOR ORDERS 50€+)

aswo
  

Image is for illustrative purposes only

Embedded radio receiver 2 channels 60mm, Exta Free

  • SKU: ROP-07
  • Zamel

Radio receivers are used both as elements for installation in under and surface installation boxes, as well as executive devices installed directly in the housings of lighting fixtures and other receivers. ROP-07 allows you to work in 5 different modes (on, off, monostable, bistable, time). The device has two outputs controlled both by radio and through connectors from any manufacturer. Thanks to such a solution, it is possible to build a classic lighting control system for stair control.


cooperation with transmitters of the EXTA FREE wireless control system

control of lighting, heating and other work

range: 250 m in the open area

low power consumption, continuous operation

two voltage relays (230V - phase L potential at the output) output NO

easy assembly in a Ø60 mm flush-mounted box

optical signaling of operation

external inputs intended for cooperation with traditional installation connectors (bistable)

5 operating modes: switching on, switching off, monostable mode, bistable, time mode (delayed switching off)

possibility to increase the operating range by using the RTN-01 retransmitter

Input (supply) terminals: L, N

Input rated voltage: 230 V AC

Input voltage tolerance: -15 ÷ +10 %

Nominal frequency: 50 / 60 Hz

Nominal power consumption:

0,39 W „stand-by” mode/

0,69 W operation mode 1 channel/

1,09 W operation mode 2 channels/

Number of operation modes: 5

Number of channels: 2

Transmission: radio 868,32 MHz

Transmission way: unidirectional

Coding: addressing transmission

Maximum number of transmitters: 32

Range: up to 230 m in the open area

Time adjustment: 1 second ÷ 18 hours (every 1 sec.)

tical signalling of transmitter’s operation: LED red diode

Input terminals: IN1, IN2

Transmitter’s input (supply) terminals: OUT1, OUT2 - voltage output

Relay contact parameters: 2NO 5A / 250V AC AC1 1250 VA (voltage contact)

Number of terminal clamps: 6

Section of connecting cables: up to 2,5 mm2

Ambient temperature range: -10 ÷ +55 oC

Operating position: free

Casing mounting: easy junction box Ø 60 mm installation

Casing protection degree: IP20 (EN 60529)

Protection level: II

Overvoltage category: II

Pollution degree: 2

Surge voltage: 1 kV (EN 61000-4-5)

Dimensions: 47,5 x 47,5 x 20 mm

Weight: 0,039 kg

Reference standard: EN 60669, EN 60950, EN 61000

Customers who bought this, aslo bought