Pilt on illustratiivne

Raspberry Pi heliplaat

  • Tootekood: SUP-X400
Järelmaksu taotluse esitamiseks lisage toode ostukorvi, valige makseviisiks Liisi järelmaks ning kinnitage tellimus. Peale tellimuse kinnitamist ilmub ekraanile Liisi järelmaksu taotlus. Arvutus on ligikaudne ja võib erineda Teile pakutavatest tingimustest.
Pealadu1
Peterburi tee Oomipood1

X400 is a highly cost-effective forraspberry piRaspberry Pi Model B+, Raspberry Pi 2 Model B Raspberry Pi 3 Model B Audio sound card, use the I2S interface program, support 24 - bit / 192 KHZ high quality sound,
Can connect other audio equipment through lotus socket; Built-in high fidelity headphone amplifiers can be through the standard 3.5 mm headphone socket convenient use headphones; Built-in digital power amplifier output power up to 2 x30w can be directly through the terminal connection box. Can let the player more easily raspberries pie make nondestructive music system or network radio radio.

- For Use With - RASPBERRY PI3/ PI2 / PI1
- Operating System - Raspbian Jessie / Volumio ...etc 
- Input Voltage - 6V to 24Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
- Dimensions - 85 x 56mm (Same size as Raspberry Pi)
- Built in IR sensor (38KHz)

Audio    
 - Full-HD audio – up to 24-bit/192kHz playback
 - Class leading audio; 112db SNR, and THD of 0.0019%
 - Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
 - Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
 - Integrated hardware volume control
 - Mute can be enabled / disabled via jumper
 - Built in High quality audio headphone amplifier (TI TPA6133A)
 - Earphone AMP can be enabled / disabled via jumper
 - Built in High quality Class-D stereo audio amplifier (TI TPA3118D2)
 - Up to 2 x 20W into 4 ohm
 - AMP can be enabled / disabled via jumper
 - Phono/RCA connectors
 - 3.5mm stereo audio jack
 - Speaker terminals

Misc    
 - Power output socket
 - DIP switch to remove connection from RPi’s pin header
 - Directly connected on top of the Raspberry Pi using the board GPIO header pins
 - No wiring nor soldering is required
 - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards


Lisainfo:
http://www.suptronics.com/xseries/x400.html


Samast kategooriast

Dormikor OÜ, Peterburi tee 90f, 11415, Tallinn, Eesti
Oomipood © 2018