-
Ваша корзина пуста!
The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE. Both Motor and Control boards are microcontroller boards based on the ATmega32u4 (datasheet). The Robot has many of its pins mapped to on-board sensors and actuators. Programming the robot is similar to the process with the Arduino Leonardo. Both processors have built-in USB communication, eliminating the need for a secondary processor. This allows the Robot to appear to a connected computer as a virtual (CDC) serial / COM port.
Manufacturer: | ARDUINO |
Microcontroller: | ATmega32u4 |
Display: | TFT 160x128 |
AA battery slot: | 4 alkaline or aku |
Connector type: | ICSP |
Connector type: | USB B |
Connector type: | pin strips |
Connector type: | power |
Number of keys: | 7 |
Interface: | I2C |
Interface: | SPI |
Interface: | UART |
Number of diodes: | 9 |
Communication with PC: | USB |
Programmers/Erasers features: | infrared sensor |
Programmers/Erasers features: | 4xAA battery slot |
Programmers/Erasers features: | socket for MMC/SD cards |
Programmers/Erasers features: | I/O lines led to goldpin connectors |
Programmers/Erasers features: | I2C 512kbit EEPROM memory |
Programmers/Erasers features: | piezo sounder |
Type of development kit: | Arduino |
In the set | prototype board |
Associated circuits package: | QFN44 |
Andmeleht | Скачать |