Код товара:PNI-M1000VA
Voltage stabilizer with relay PNI AVR M1000VA, 2.7A, 600W, 1000VA
Фото может отличаться от товара
Voltage stabilizer with relay PNI AVR M1000VA, 2.7A, 600W, 1000VA
No voltage fluctuations The PNI AVR M800VA 480W voltage stabilizer with relay has been designed to keep the output voltage as stable as possible. When the voltage from the electrical network fluctuates, the PNI AVR M800VA will automatically adjust the voltage to the normal value. Depending on their capacity, PNI stabilizers have a wide range of applications: electronic devices, household appliances, air conditioners, power tools, refrigerators and, in general, electronics that need stable voltage.
How does it work? When the unit that measures the input voltage detects a variation outside the preset range, it will send a signal to the control unit. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and control the output voltage within the preset range. Copper coil is the basic component of the voltage stabilizer. The PNI AVR M800VA 480W voltage stabilizer with relay uses high quality pure copper. Thus, the coil has a longer life and greater efficiency.
Maximum load supported The maximum load supported by the PNI AVR M800VA voltage stabilizer is 480W 2.2A. The stabilizer's 480W 2.2A capacity allows you to connect household appliances, including TVs, printers, microwave ovens, fans, and more. Attention: do not connect consumers with loads exceeding the stabilizer's power. For example, electronics with a motor/compressor can have 2-6 times more power than the declared power at startup. Choose the stabilizer taking this into account.
Essential functions Within the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% output power. Outside this range, the output power should be according to the attached diagram. Important functions: output delay (time-delay) - 6 or 180 seconds; automatic overvoltage and undervoltage protection (180V - 250V); overload/overtemperature protection; automatic adaptation to input frequency (50 / 60 Hz).
Features
Capacity: 600W/1000VA
Output connectors: 2 x Schuko socket
Output voltage: 230V ± 8%
Input frequency: 50/60 Hz
Nominal Input Voltage: 230V -35%, +20%
Overheating protection: Yes
Short circuit protection: Yes
Efficiency: >98%
Working temperature: -10°C ~ +40°C
Humidity: ≤90%
Dimensions: 125 x 155 x 265 mm
Weight: 3.32 kg
Exit delay: 6 / 180 seconds
Ventilation fan
Surge protection: Yes
Low voltage protection: Yes
Phase: Single Phase

Из той же категории