Oomipood

LOYAL CUSTOMER DISCOUNTS

at least -5% off

QUANTITY DISCOUNT

more is better

SHIPPING TO DPD PARCEL LOCKER

FREE IN ESTONIA (FOR ORDERS 50€+)

aswo
  

Image is for illustrative purposes only

Fibaro Flood Sensor, freezing, temperatures Z-wave

  • SKU: FGFS-101
  • Fibaro

The Fibaro Flood Sensor is the most functional water leak sensor for your smart home. It is designed to either be placed on the floor or a wall with the gold-plated water-sensing probes extended by a connected wire. The device can be battery or VDC powered (12/24 VDC). It also has a built-in tilt sensor that reports any movement of the device to the central Z-Wave controller. The Fibaro Flood Sensor is also buoyant and can float on the water’s surface. It also has a built-in temperature sensor that can alert you if there is an increase or decrease in temperature, which can protect your home from damage caused by frozen pipes. The Fibaro Flood Sensor is compatible with many Z-Wave smart hubs such as Home Center 2 and Lite, SmartThings, HomeSeer, Vera, Clare Controls and Nexia. (Note: This device does not currently work with Wink).

Protect your home against water damage: Fibaro flood sensor is the ultimate Z-Wave water leak sensor/detector, with temperature and tilt sensor

Mobile alerts: Get notified immediately on your smartphone, tablet, or email when water is detected

Visual alerts: trigger certain lights, activate specific scenes or even sirens if there is a threat

Audio alerts: The Flood Sensor will notify you when it detects water with an accoustic alarm

Protection even on uneven surfaces: three 24K plated gold telescoping feet always make sure it’s making contact even on uneven surfaces and never corrodes

Prevent frozen pipes: built-in temperature sensor can notify you if there is a sudden rise or fall in temperature

Flood sensor works with most Z-Wave Controllers such as Home Center 2, Home Center Lite, SmartThings, Vera, Nexia, Clare Controls, and HomeSeer. (does not currently work with Wink)

Power supply: Battery or 12–24V DC supply (LPS or NEC class 2)

Battery type: CR123A/CR17345 battery, 3.0V DC

Power consumption (at VDC operation) 0.4W

Output terminals maximum current carrying capacity:

(ALARM NC, TAMP NC) 25mA

Maximum voltage at output terminals:

(SMOKE NC, TAMP NC) 24V DC / 20V AC

EU standards compliance: RED 2014/53/EU

RoHS 2011/65/EU

Radio protocol: Z-Wave

Z-Wave+ (firmware 3.2 or higher)

Radio frequency: 868.4 or 869.8 MHz EU;

908.4 or 916.0 MHz US;

921.4 or 919.8 MHz ANZ;

869.0 MHz RU;

Radio transmit power: up to -5 dBm (EIRP)

Range: up to 50 m outdoors

up to 30 m indoors

up to 40 m indoors (firmware 3.2 or higher)

(depending on terrain and building structure)

Operational temperature: 0°C to 40°C – battery powering mode

-20°C to 70°C – VDC powering mode

Measured temperature range: -20°C to 100°C

Temperature measuring accuracy: 0.5°C (within 0 – 40°C range)

Dimensions (diameter x height): 72 x 28mm