Nova Fitness SDS011 PM Air Quality Sensor - PM2.5 & PM10

Nova Fitness SDS011 is a professional laser dust sensor. Fan mounted on sensor automatically sucks air. Sensor uses laser light scattering principle to measure value of dust particles suspended in the air. Sensor provides high precision and reliable readings of PM2.5 and PM10 values. Any change in environment can be observed almost instantaneously - short respond time below 10 seconds. Sensor in standard mode reports reading with 1 second interval.
They are two ways to communicate with SDS011 sensor:
digital out (UART)
PWM signal (one for PM2.5 and one for PM10)
Set includes:
Nova Fitness SDS011 sensor
cable
USB-UART converter
Just SDS011 sensor
This product is just a SDS011 sensor (with dongle and cable). If You are looking for more complete air quality measurement solution check some of those kits
Specification:
Measured values: PM2.5, PM10
Range: 0 - 999.9 μg /m³
Supply voltage: 5V (4.7 - 5.3V)
Power consumption (work): 70mA±10mA
Power consumption (sleep mode laser & fan): < 4mA
Storage temperature: -20 to +60C
Work temperature: -10 to +50C
Humidity (storage): Max. 90%
Humidity (work): Max. 70% (condensation of water vapor falsify readings)
Particle counting accuracy: 70% for 0.3μm
98% for 0.5μm
Relative error: ±15% ±10 µg (for 25°C and 50% RH)
Size: 71x70x23 mm
Certification: CE, FCC, RoHS
Pinout:
Pin 1 - not connected
Pin 2 - PM2.5: 0-999μg/m³; PWM output
Pin 3 - 5V
Pin 4 - PM10: 0-999 μg/m³; PWM output
Pin 5 - GND
Pin 6 - RX UART (TTL) 3.3V
Pin 7 - TX UART (TTL) 3.3V
Software:
Simple Python script to read values from sensor
Frank Heuer’s project to handle most of SDS011’s functions (including duty cycles and hibernation)
Arduino Library
Original Chinese software if you are brave enough to use it :)
We also carry other dust sensors: