Heltec CubeCell GPS-6502 HTCC-AB02S LoRa 433 MHz - development board with GPS
SKU:MOD-2134
Image is for illustrative purposes only
Features:
Perfect Arduino-Compatible!
CE and FCC certification
Based on ASR6052 - chip with integrated PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and Semtech SX1262;
LoRaWAN 1.0.2 support
Low power design, 50uA in deep sleep
Good impedance matching
Long communication distance
Build in Air530 GPS/Beidou receiver
Build in blue 0.96” OLED screen with 128x64px resolution
Specification:
MCU: ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip: ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRaWAN working band: EU433
LoRa maximum output power: 22dB ± 1dB
Hardware resources: 2 x UART
2 x SPI
2 x I2C
1 x SWD
3 x 12–bit ADC
8–channel DMA engine
16 x GPIO
FLASH: 128KB
LoRa Antenna (IPEX)
Size: 59.9mm x 27.9mm x 9.5 mm
Lithium battery connector: SH1.25-2P
Supply voltage: USB (≥500mA): 4.7 - 6V
Battery (≥250mA): 3.3 - 4.2V
Via 3.3V Pin (≥150mA): 2.7 - 3.5V
Via 5V Pin (≥500mA): 4.7 - 6V
USB-Serial bridge: CP2102
Radio power consumption: LoRa Rx Mode: 10mA
LoRa 10dBm output: 70mA
LoRa 14dBm output: 90mA
LoRa 17dBm output: 100mA
LoRa 20dBm output: 105mA
Output: 3.3V: 500mA
5V (USB): equal USB power supply
Vext 3.3V: 350mA
Links:
Installing CubeCell Arduino Development Envioroment Readme at Github
Using Arduino Board manager
CubeCell Arduino Soure Code
CubeCell HTCC-AB01 Pinout diagram
Perfect Arduino-Compatible!
CE and FCC certification
Based on ASR6052 - chip with integrated PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and Semtech SX1262;
LoRaWAN 1.0.2 support
Low power design, 50uA in deep sleep
Good impedance matching
Long communication distance
Build in Air530 GPS/Beidou receiver
Build in blue 0.96” OLED screen with 128x64px resolution
Specification:
MCU: ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip: ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRaWAN working band: EU433
LoRa maximum output power: 22dB ± 1dB
Hardware resources: 2 x UART
2 x SPI
2 x I2C
1 x SWD
3 x 12–bit ADC
8–channel DMA engine
16 x GPIO
FLASH: 128KB
LoRa Antenna (IPEX)
Size: 59.9mm x 27.9mm x 9.5 mm
Lithium battery connector: SH1.25-2P
Supply voltage: USB (≥500mA): 4.7 - 6V
Battery (≥250mA): 3.3 - 4.2V
Via 3.3V Pin (≥150mA): 2.7 - 3.5V
Via 5V Pin (≥500mA): 4.7 - 6V
USB-Serial bridge: CP2102
Radio power consumption: LoRa Rx Mode: 10mA
LoRa 10dBm output: 70mA
LoRa 14dBm output: 90mA
LoRa 17dBm output: 100mA
LoRa 20dBm output: 105mA
Output: 3.3V: 500mA
5V (USB): equal USB power supply
Vext 3.3V: 350mA
Links:
Installing CubeCell Arduino Development Envioroment Readme at Github
Using Arduino Board manager
CubeCell Arduino Soure Code
CubeCell HTCC-AB01 Pinout diagram