Pilt on illustratiivne

Arduino Robot

  • Tootekood: A000078
  • Arduino
Järelmaksu taotluse esitamiseks lisage toode ostukorvi, valige makseviisiks Liisi järelmaks ning kinnitage tellimus. Peale tellimuse kinnitamist ilmub ekraanile Liisi järelmaksu taotlus. Arvutus on ligikaudne ja võib erineda Teile pakutavatest tingimustest.
Peterburi tee Oomipood1
Järve keskuse Oomipood1
The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE. Both Motor and Control boards are microcontroller boards based on the ATmega32u4 (datasheet). The Robot has many of its pins mapped to on-board sensors and actuators. Programming the robot is similar to the process with the Arduino Leonardo. Both processors have built-in USB communication, eliminating the need for a secondary processor. This allows the Robot to appear to a connected computer as a virtual (CDC) serial / COM port.
Manufacturer:ARDUINO
Microcontroller:ATmega32u4
Display:TFT 160x128
AA battery slot:4 alkaline or aku
Connector type:ICSP
Connector type:USB B
Connector type:pin strips
Connector type:power
Number of keys:7
Interface:I2C
Interface:SPI
Interface:UART
Number of diodes:9
Communication with PC:USB
Programmers/Erasers features:infrared sensor
Programmers/Erasers features:4xAA battery slot
Programmers/Erasers features:socket for MMC/SD cards
Programmers/Erasers features:I/O lines led to goldpin connectors
Programmers/Erasers features:I2C 512kbit EEPROM memory
Programmers/Erasers features:piezo sounder
Type of development kit:Arduino
In the setprototype board
Associated circuits package:QFN44
Andmeleht0BLink

Kliendid, kes ostsid selle toote, ostsid ka

Dormikor OÜ, Peterburi tee 90f, 11415, Tallinn, Eesti
Oomipood © 2018