Arduino Micro
SKU:A000053
Manufacturer:Arduino
Image is for illustrative purposes only
The Arduino Micro is a microcontroller board based on the ATmega32U4.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started.
It has a form factor that enables it to be easily placed on a breadboard.
The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started.
It has a form factor that enables it to be easily placed on a breadboard.
The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor.
Microcontroller: ATmega32u4
Clock Speed: 16 MHz
Flash Memory: 32 KB
Digital I/O Pins: 20
Analog Input Pins: 12
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
PWM Digital I/O Pins: 7
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory for Bootloader: 4 KB
SRAM: 2.5 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Flash Memory: 32 KB
Digital I/O Pins: 20
Analog Input Pins: 12
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
PWM Digital I/O Pins: 7
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory for Bootloader: 4 KB
SRAM: 2.5 KB
EEPROM: 1 KB
