Your shopping cart is empty!
Arduino Uno Rev3
Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
|Clock Speed :||16 MHz|
|Flash Memory:||32 KB|
|Digital I/O Pins:||14|
|Analog Input Pins :||6|
|Input Voltage (recommended):||7-12V|
|Input Voltage (limit):||6-20V|
|PWM Digital I/O Pins:||6|
|DC Current per I/O Pin:||40 mA|
|DC Current for 3.3V Pin:||50 mA|
|Flash Memory for Bootloader :||0.5 KB|
|SRAM :||2 KB|
|EEPROM :||1 KB|
|Arduino Uno tutvustus||370.18KB||Download|