SKU:OKYN-G5259
Manufacturer:
Okystar
Image is for illustrative purposes only
Note! This kit requires soldering!
Features:
Aeroplane-shaped circuit board with a colourful running light effect
Seven LEDs flash in sequence
Simple operation using a slide switch
A good introductory project for students and electronics enthusiasts
Useful information:
Recommended age: 14+
Estimated assembly time: 1-2 hours
Batteries included: Yes (2x CR1220)
Recommended tools are listed in the technical data and the electronic manual (available under Files)
Features:
Aeroplane-shaped circuit board with a colourful running light effect
Seven LEDs flash in sequence
Simple operation using a slide switch
A good introductory project for students and electronics enthusiasts
Useful information:
Recommended age: 14+
Estimated assembly time: 1-2 hours
Batteries included: Yes (2x CR1220)
Recommended tools are listed in the technical data and the electronic manual (available under Files)
Tools and accessories
Required for assembly
Soldering iron: at least 50W, with a fine tip — LUT0038; or a station with a desoldering gun — YIHUA 948DQ-III
Solder wire: 0.5–1mm — lead-free SN99C-0.7/0.1 or leaded LC60-0.70/0.1
Side cutters: small — PG-TRE03NB
Tweezers: straight or curved — ZD-156F
Rosin / flux paste: paste is preferred — AGT-037
Recommended aids
Helping hands: at least 2 clips and a magnifier — HH-391A
Cleaning: flux remover / isopropyl alcohol (IPA) — AGT-002
Desoldering braid: up to 2mm wide — 27161500
Heat-resistant work surface: silicone mat or similar — PCW10A
Multimeter: a basic multimeter is suitable — UT131A
Metal wool / cleaning sponge: for cleaning the soldering iron tip — YIHUA 08B.
Required for assembly
Soldering iron: at least 50W, with a fine tip — LUT0038; or a station with a desoldering gun — YIHUA 948DQ-III
Solder wire: 0.5–1mm — lead-free SN99C-0.7/0.1 or leaded LC60-0.70/0.1
Side cutters: small — PG-TRE03NB
Tweezers: straight or curved — ZD-156F
Rosin / flux paste: paste is preferred — AGT-037
Recommended aids
Helping hands: at least 2 clips and a magnifier — HH-391A
Cleaning: flux remover / isopropyl alcohol (IPA) — AGT-002
Desoldering braid: up to 2mm wide — 27161500
Heat-resistant work surface: silicone mat or similar — PCW10A
Multimeter: a basic multimeter is suitable — UT131A
Metal wool / cleaning sponge: for cleaning the soldering iron tip — YIHUA 08B.
-
YIHUA 948DQ-III109.00 €Customer price103.55 €-5% -
OKYN231107-828.00 €Customer price7.60 €-5%
