LED street light, with motion sensor and dusk 4W 6500K 400lm IP54 Solar Panel

This 4W LED lamp provides high brightness up to 400 lumens and a light temperature of 6500K. The lamp is equipped with a twilight sensor and motion sensor.

The street light is powered by a built-in rechargeable battery (18650 1200mAh 3.7). No mains voltage is required as the lamp is powered by sunlight. It takes 8 hours to fully charge the battery if the sun is bright. Once fully charged, the lamp runs for up to 12 hours (depending on the mode of operation, environment, time of year).

IP54 - Dust and Water Splash Protection: The IP54 rating protects against access to hazardous parts through cables, protects against dust and protects against splashing water from all directions. This makes the lamp easy to withstand even the harshest weather conditions, such as rain.

Vertical and horizontal adjustment: The lamp is easy to mount on a wall or even on the ceiling - mounting height of the lamp: 1.8-3 m. Once installed, you can easily adjust the height and direction of the luminaire to shine in the selected location.

IR motion sensor: An infrared motion sensor ensures that the light automatically turns on (depending on the selected mode) with a detection angle of 120°. The detected speed of motion is: 0.6 - 1.5 m/s.

Specification:

- IP54: protection against access to dangerous parts through cables, dust protection, protection against splashing water from all sides

- Nominal voltage: 3.7 DC

- Nominal lamp power: 4W

- Luminous flux: max. 400lm

- Maximum lamp life: 20,000 hours

- Working Battery: 1x 18650 1200mAh 3.7 Li-Poly

- Remote control battery.

- The lamp is suitable for indoor and outdoor use

- Minimum distance from the object to be illuminated: 0.1 meter

- Operating temperature: -20 °C to 35 °C

- Color of light: Cold white (6500 K)

- Angle of detection of movement sensor: 120°.

- Height of fixture installation: 1.8-3 m

- Motion detection speed: 0.6-1.5 m/s.

3 modes of operation:

The sensor detects motion after dark, activating the lamp at 100% power for 20 seconds.

Lamp operates at 20% power after dark. Lamp turns on at 100% power for 20 seconds after motion detection.

The lamp is permanently on at 20% power.

The mode can be easily changed with the included remote control.

- Practical and energy saving solar light with remote control, motion sensor and twilight sensor

- PIR motion sensor with 120° detection angle and 0.6-1.5 m/s detection speed