Remote-controlled socket, RF, Exta Free 230V

SKU:RWG-01
Manufacturer:Zamel
Remote-controlled socket, RF, Exta Free 230V
Image is for illustrative purposes only

The remote-controlled disocket RWG-01 provides connection of any electric 230 receiver up to 4000 VA and its wireless control using any EXTA FREE system transmitters. Installation of the device does not require tools or changes in the existing wiring - the device is installed directly into the 230 V socket.


Collaboration with EXTA FREE Wireless Control System transmitters

5 modes of operation: switching on, off, mode monostable, bistable, time (delay off),

low power consumption, possibility of constant operation

control of lighting, heating, other applications

large range (up to 300 m),

possibility of increasing range of action by using a repeater RTN-01.

simple assembly directly in a 230 V socket ~

optical signaling of radio station transmission and relay status

RWG-01

Input rated voltage: 230 V AC

Input voltage tolerance: -15 ÷ +10 %

Nominal frequency: 50 / 60 Hz

Nominal power consumption: 0,29 W

Optic signalling of power supply: LED green diode

Number of operation modes: 5

Number of channels: 1

Transmission: radio 868,32 MHz

Coding way: unidirectional

Coding: addressing transmission

Maximum number of transmitters: 32

Range: up to 300 m in the open area

Time adjustment: 1 sec. ÷ 18 hours (every second)

Optic signalling of device operation: LED red diode

Relay contact parameters: 1NO 16A / 250V~ AC1 4000 VA

Ambient temperature range: -10 ÷ +55 oC

Operating position: free

Casing mounting: 230 V~ socket

Casing protection degree: IP20 (EN 60529)

Protection level: II

Overvoltage category: II

Pollution degree: 2

Surge voltage: 1 kV (EN 61000-4-5)

Dimensions: 160 x 66 x 90 mm

Weight: 0,160 kg

Reference standard: EN 60669, EN 60950, EN 61000

The symbol means selective

collecting of electrical and electronic

equipment.

It is forbidden to put the used

equipment together with other waste.

Antenna

Optic signalling of transmitters’

switching on

Programming push-button

Receiver’s socket

Power supply plug

Optic signalling of input voltage

APPLICATION

Remote control socket RWG-01 operates as a receiver of 8-channel remote control P-256/8 and of

2–channel button radio transmitter RNK-02 (light sources control - switch on / switch off). Presented

transmitters can also control operation of 1-channel radio receiver ROP-01 or radio lighting switch

RWG-01 juhend en763.34KB
Download
RWG-01 kasutusjuhend765.5KB
Download

In the same category