SKU:PNI-MAB600
Manufacturer: PNI
New PNI MAB600 swing gate automation kit, 2 × 60 W, up to 2 × 300 kg
Image is for illustrative purposes only

The PNI MAB600 is an automation kit for a two-leaf swing gate. According to the manufacturer, each gate leaf may be up to 3 m long and weigh up to 300 kg, giving a maximum combined weight of 600 kg for two leaves. The kit uses two 24 V DC, 60 W actuators and a control unit powered from 230 V AC.

The system supports slow start and stop, an automatic closing delay and a separate pedestrian mode. The kit includes two actuators, a control unit, two 433 MHz remote controls, two photocells, a warning light and installation accessories. Tuya Smart control requires a separate PNI-RG120 or PNI-RG121 relay, which is not included.

Supply voltage: 230 V AC
Actuator voltage: 24 V DC
Actuator power: 2 × 60 W
Motor speed: 100 rpm
Maximum actuator stroke: 340 mm
Rod travel speed: 2.4 cm/s
Maximum opening angle: 110°
Maximum weight per gate leaf: 300 kg
Maximum combined weight of two leaves: 600 kg
Maximum length per gate leaf: 3 m
Remote control frequency: 433 MHz
Protection rating: IP55
Operating temperature: −26 to 80 °C
Functions: slow start/stop, automatic closing delay, direction setting, lock release time setting, pedestrian mode
Tuya Smart: requires a separate PNI-RG120 or PNI-RG121 relay
Set includes: 2 actuators, control unit, warning light, 2 remote controls, 2 photocells and installation accessories
PNI-MAB600_user_manual_en25.52MB
Download

In the same category