Temperature and humidity controller -20...80C 0...100RH 230V

The humidity and temperature sensor STC-3028 is a solution for use in many projects where it is necessary to control humidity and air temperature simultaneously, e.g. in warehouses, production halls, drying rooms, greenhouses or museums.
The controller has two LED displays: 1 red to display the temperature and 2 blue to display the humidity.
There are LED diodes above the displays, the light of which indicates the switched-on relay and thus the operation of the corresponding system.
The thermostat has a heating/cooling option, depending on the configuration, and a hygrometer with a dehumidification/humidification function, depending on the configuration.

The temperature and humidity regulator included with the sensor is powered by 230V. It has 2 readable screens: a red one responsible for the temperature reading and a blue one for the humidity and rubber buttons to change the configuration. Above each display is an LED that illuminates when the temperature/humidity control is activated. Depending on the settings made, the controller can work simultaneously in the following modes: heating/cooling and humidification/drying. The device is very easy to set up, it can handle connected devices (e.g. fans, heaters, humidifiers, sprinklers, boilers) with a power not exceeding 2500W and a maximum current consumption of 10A per channel. The module has a settings memory, a power failure does not reset the entered values. The set includes an integrated temperature and humidity sensor on a 1m cable.