Thermostat SPST heating/cooling -50..+110C 250VAC 1500W

Enables controlling different types of electrical equipment such as: central heating pumps, water pumps, circulation pumps, etc.
A simple and reliable temperature control system. The controller can work in "cooling" and "heating" modes, which makes it a very universal system.

Programming:
Setting the temperature to activate (start) the device connected to the controller:
Press and hold the ^ button for 3 seconds to enter temperature edit mode - the display should flash. In edit mode, you can set the desired temperature using the ^ and ˇ buttons. After setting the temperature, do not touch the buttons for 3 seconds to save the set temperature.

Setting the temperature to turn off the device connected to the controller (stop):
Press and hold the button for 3 seconds to enter temperature edit mode - the display should flash. In edit mode, you can set the desired temperature using the ^ and ˇ buttons. After setting the temperature, do not touch the buttons for 3 seconds to save the set temperature.

To check the set activation temperature (start) or target temperature (stop), press the -OR button once.

Start temperature ^START lower than stop temperature ˇSTOP - HEATING MODE

Switch-on temperature ^START higher than switch-off temperature ˇSTOP - COOLING MODE.

Red wire: power (black - neutral).

Yellow wire: receiver, the operation of which is controlled by the thermostat (black - neutral).