SKU:3777727
New
Image is for illustrative purposes only
The NTCLE350 series thermistor is designed for high-temperature applications up to +185 °C, withstanding 200 °C for up to 168 hours. It consists of a mini-chip soldered between two AWG #32 PEEK insulated silver-plated NiFe alloy leads, finished with a black epoxy lacquer coating. This construction ensures high adhesive strength and resistance to noxious gases and acids.
This series is AEC-Q200 qualified, making it suitable for automotive sensing in electric traction motors, exhaust gas recirculation (EGR) systems, and oil temperature sensors (OTS). It is also used in engine coolant and fuel sensors, manifold air pressure (TMAP) sensing, and HVAC applications. The sensor features a compact radial design with a maximum body diameter of 2.4 mm and offers high sensitivity and fast response times.
This series is AEC-Q200 qualified, making it suitable for automotive sensing in electric traction motors, exhaust gas recirculation (EGR) systems, and oil temperature sensors (OTS). It is also used in engine coolant and fuel sensors, manifold air pressure (TMAP) sensing, and HVAC applications. The sensor features a compact radial design with a maximum body diameter of 2.4 mm and offers high sensitivity and fast response times.
Resistance at 25 °C: 5000 Ω
Resistance tolerance: ± 5 % (J)
B25/85-value: 3435 K
B25/85 tolerance: ± 1 %
Operating temperature range: -55 °C to +185 °C (200 °C for 168 h max)
Response time (63.2 %): 6 s (in stirred air)
Dissipation factor: 1.0 mW/K (in still air)
Maximum power dissipation at 55 °C: 100 mW
Minimum dielectric withstanding voltage (RMS): 1000 V AC
Minimum insulation resistance at 500 V DC: 100 MΩ
Weight: 30 mg
Body diameter: max 2.4 mm
Body thickness: max 2.4 mm
Lead length (L): 40 ± 1 mm
Lead length (L1): 6 ± 1 mm
Lead length (L2): 5 ± 1 mm
Conductor diameter (d1): 0.2 ± 0.02 mm
Insulation diameter (d2): 0.4 mm
Lead material: Ag-plated NiFe alloy with PEEK insulation
Mounting: Radial, suitable for crimping, brazing, and welding
Qualification: AEC-Q200 (rev. D)
Resistance tolerance: ± 5 % (J)
B25/85-value: 3435 K
B25/85 tolerance: ± 1 %
Operating temperature range: -55 °C to +185 °C (200 °C for 168 h max)
Response time (63.2 %): 6 s (in stirred air)
Dissipation factor: 1.0 mW/K (in still air)
Maximum power dissipation at 55 °C: 100 mW
Minimum dielectric withstanding voltage (RMS): 1000 V AC
Minimum insulation resistance at 500 V DC: 100 MΩ
Weight: 30 mg
Body diameter: max 2.4 mm
Body thickness: max 2.4 mm
Lead length (L): 40 ± 1 mm
Lead length (L1): 6 ± 1 mm
Lead length (L2): 5 ± 1 mm
Conductor diameter (d1): 0.2 ± 0.02 mm
Insulation diameter (d2): 0.4 mm
Lead material: Ag-plated NiFe alloy with PEEK insulation
Mounting: Radial, suitable for crimping, brazing, and welding
Qualification: AEC-Q200 (rev. D)
