SKU:PNI-LED850FC
Folding CB PNI LED 850 antenna, 85 cm, 26-28 MHz, 300 Watt, illuminates during transmission, PL thread type, without accessories
LED coil - illuminates during transmission The PNI LED 850 Tiltable CB Antenna is the continuation of a new line of CB antennas, designed to make the use of the CB band unique. The antenna guarantees superior communication performance and improves visibility to the maximum. The antenna coil is equipped with diodes that emit light when crossed by radio frequency. The coil turns on automatically when the radio transmits, thus also indicating the correct operation of the equipment.
Possibilities of use The antenna can be mounted either on a PL magnetic base or on a fixed bracket purchased separately (for example: PNI SPA100, PNI SPA125, PNI L21). Test the SWR in an open area using a reflectometer. In certain cases, you may need to lift or shorten the wire to achieve an optimal SWR value. For optimal results, we recommend that this procedure, called calibration, be performed by specialized personnel. Note: PNI antennas are factory calibrated on the 27.225Mhz (channel 22) frequency .
LED coil - illuminates during transmission The PNI LED 850 Tiltable CB Antenna is the continuation of a new line of CB antennas, designed to make the use of the CB band unique. The antenna guarantees superior communication performance and improves visibility to the maximum. The antenna coil is equipped with diodes that emit light when crossed by radio frequency. The coil turns on automatically when the radio transmits, thus also indicating the correct operation of the equipment.
Possibilities of use The antenna can be mounted either on a PL magnetic base or on a fixed bracket purchased separately (for example: PNI SPA100, PNI SPA125, PNI L21). Test the SWR in an open area using a reflectometer. In certain cases, you may need to lift or shorten the wire to achieve an optimal SWR value. For optimal results, we recommend that this procedure, called calibration, be performed by specialized personnel. Note: PNI antennas are factory calibrated on the 27.225Mhz (channel 22) frequency .
Workband: ? B
Product color (spike): Silver
Coil color: Black
General features
Working frequency: 26 - 28 MHz
Number of channels: 80
Maximum applied power: 40 W continuous / 300 W for a short time
Minimum SWR in the center of the band: less than 1.2:1
Length: 850mm
Impedance: 50 Ohms
Material: Stainless steel
Connector type: PL
Hole diameter: 16 mm
size: 40 x 40 x 850 mm
Polarization: vertically
Working distance: 10 km
Magnetic base: Not included
Operating temperature: -26 ~ +55°C
tiltable: Yes, up to 90 degrees
Product color (spike): Silver
Coil color: Black
General features
Working frequency: 26 - 28 MHz
Number of channels: 80
Maximum applied power: 40 W continuous / 300 W for a short time
Minimum SWR in the center of the band: less than 1.2:1
Length: 850mm
Impedance: 50 Ohms
Material: Stainless steel
Connector type: PL
Hole diameter: 16 mm
size: 40 x 40 x 850 mm
Polarization: vertically
Working distance: 10 km
Magnetic base: Not included
Operating temperature: -26 ~ +55°C
tiltable: Yes, up to 90 degrees
