Oomipood

LOYAL CUSTOMER DISCOUNTS

at least -5% off

QUANTITY DISCOUNT

more is better

SHIPPING TO DPD PARCEL LOCKER

FREE IN ESTONIA (FOR ORDERS 50€+)

aswo
  

Image is for illustrative purposes only

Signal generator FG-100

  • SKU: OKY3495-2
  • Okystar
Pealadu
Tallinn, Peterburi tee 90F
18 pcs
Peterburi tee Oomipood
Tallinn, Peterburi tee 90F
2 pcs
Järve keskuse Oomipood
Tallinn, Pärnu mnt. 238
1 pcs
Lõunakeskuse Oomipood
Tartu, Lääneringtee 39
1 pcs
Põhjakeskuse Oomipood
Rakvere, Haljala tee 4
1 pcs
Kaubamajaka Oomipood
Pärnu, Papiniidu 8
0 pcs
Pargi keskuse Oomipood
Jõhvi, Puru tee 1
1 pcs

1. Main technical parameters:

1). 1.1.1.1. output waveforms: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram wave, noise wave.

2). Power supply: DC4-10V. It is recommended to choose DC5V and a 3.7V lithium battery for the adapter.

3). Current: 250mA when voltage is 5V.

4). Frequency range: sine wave 1Hz-500kHz (output amplitude decreases with further increase of frequency), other waveforms 1Hz-50kHz (but the upper limit of adjustable frequency is not limited, if the distortion and flicker requirements are not high, the frequency can be further increased).

5). Resolution: 1Hz.

6). Sinusoidal distortion: <1% below 1kHz, <0.5% above 1kHz.

7). Output amplitude: maximum ± 10 V (P-P).

8). Output impedance: 50 ohms.

9). DC offset: maximum ± 10 V, with cut-off function.

10). All setting parameters can be stored.

11). On/off filters, which can be well adapted to the sinusoidal and pulse waveform output.

Features 2:

Compact size (125*80*26.5mm), easy to use, easy to carry. Can be powered by power adapter or 3.7 V lithium battery. With oscilloscope, it can be used for electronic circuit test and debugging, frequency response and impulse response test, and sound amplifier measurement. 

In the same category